Refilling your Aspire vape tank (such as the Aspire Nautilus or other models) is a simple process, but it’s important to follow the steps carefully to avoid leaks or other issues. Here’s how to refill an Aspire vape tank:

What You’ll Need:

  • E-liquid (the flavor you prefer)
  • Your Aspire tank (make sure it’s empty or low on e-liquid)
  • A clean cloth or paper towel (optional)

Steps to Refill an Aspire Vape Tank:

1. Remove the Tank from the Battery

  • Unscrew the tank from the battery or mod (the device).
  • Set the tank down on a flat surface.

2. Remove the Tank’s Top Cap

  • For most Aspire tanks, you need to unscrew or twist off the top cap to reveal the e-liquid filling ports.
  • Depending on the model, this can be done by:
    • Unscrewing the top cap: Twist the top portion of the tank counterclockwise.
    • Top-fill design: Some models have a sliding mechanism for easy access to the filling ports.

3. Locate the E-liquid Filling Ports

  • Most Aspire tanks have two small holes for filling the tank, one for the e-liquid to go in and another to allow air to escape.
  • Ensure you are filling into the correct hole, usually marked with a liquid drop or simply located on the side of the tank.

4. Refill the Tank

  • Take your e-liquid bottle and carefully insert the nozzle into one of the filling ports.
  • Slowly squeeze the bottle to fill the tank with e-liquid.
  • Do not overfill. Leave a small gap (air space) at the top of the tank to prevent leaks when the cap is screwed back on.

5. Seal the Tank

  • Once you’ve filled the tank, replace the top cap and screw it back in place.
  • Make sure it is tightly secured to avoid leaks.

6. Let the Coil Saturate (If New Coil)

  • If you have just replaced the coil, let the tank sit for about 5-10 minutes before using it. This allows the cotton inside the coil to fully absorb the e-liquid and prevents burning the coil.

7. Reattach the Tank to the Mod

  • Screw the tank back onto your vape battery or mod.
  • Make sure it is securely attached to prevent any leakage.

8. Check for Leaks

  • Once reassembled, check for any signs of leaks around the tank or drip tip. If any leakage occurs, gently wipe the tank with a cloth, ensure everything is screwed on tightly, and check that the filling ports were closed properly.

Additional Tips:

  • Don’t Overfill: Always leave a small space at the top of the tank to allow for expansion of the e-liquid.
  • Use the Right E-liquid: Ensure the e-liquid is compatible with your tank and coil. Some tanks are designed for higher VG (vegetable glycerin) liquids, while others work better with higher PG (propylene glycol) liquids.
  • Clean the Tank Regularly: Regular cleaning helps maintain the flavor and performance of your tank. Simply rinse the tank with warm water and allow it to dry before refilling.

By following these steps, you should be able to refill your Aspire vape tank safely and enjoy a smooth vaping experience.

No products were found matching your selection.

You cannot copy content of this page